| Customization: | Available |
|---|---|
| Display: | Digital |
| Portable: | Portable |
|
Still deciding? Get samples of US$ 50/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
EC-315 Soil EC tester
1. Ec-315 is a new high precision EC tester, which can be used to measure soil EC and check soil condition.With automatic temperature compensation function, it is almost not affected by ambient temperature.Widely used in aquariums, swimming pools, laboratory soils, hydroponics, food processing and animal husbandry.
2. Too high or too low soil EC value will hinder the growth of crops. According to the characteristics of fertilizer demand and growth period, soil EC value of different plants will also be different.
Specifications:
Measurement range: 0-4.00ms/cm
Resolution: 0.01ms/cm
Accuracy: ± 2% FS
Display: 4 bit LCD
Environment: Humidity: & LT;95%
Automatic temperature compensation: 0ºC-50ºC
Power supply: 4×1.5V (AG13) (live)
Size: 260 mm x 22 mm x 20 mm
Weight: 90 grams
Operation steps:
1. Press ON/OFF button to turn ON the meter.
2. Place the probe to the desired depth and saturate the soil as needed
Use deionized water.
3. Wait for the readings to stabilize.
4. After use, rinse the electrode with water to reduce pollution.
Press OFF to close the meter
Packing list:
1 * EC-316 Soil EC tester
1 * English manual
1 * small screwdriver
Calibration:
1. Immerse the meter in distilled water.Activate it after a few hours.
2. Dip the meter into the calibration solution of 1413 U s/cm.Give it a little stir
3. Keep the reading steady and turn over the calibration trimmer with a small screwdriver until the display displays "1.41"
4. Rinse the electrode with distilled water, and then hold the electrode with filter paper.
Often ask questions
Q: Can the product self-calibrate?Is calibration fluid provided?
A: Yes, the product can be self-calibrated, but the EC calibration solution is not distributed.You will need to purchase the EC calibration solution yourself.The more you strive for accuracy, the more you need to calibrate your product frequently in a short time.
Q: Does the product distribute batteries?What kind of battery?
A: Delivery battery with 4x1.5V (AG13)
Battery installation
If the meter or display fade cannot be turned on, change the battery.Unscrew the battery compartment cover on top of the meter, then pull out the battery box and replace the battery.Note the polarity of the battery.
After sales service
){kind=link}